Ruijie Firewall Port Forwarding Step by Step Guide
In this guide, we will explain in simple and understandable steps how you can perform port forwarding on Ruijie Firewall.
1. NAT Policy FormationIn this guide, we will explain in simple and understandable steps how you can perform port forwarding on Ruijie Firewall.
1. NAT Policy Formation
FiIn this guide, we will explain in simple and understandable steps how you can perform port forwarding on Ruijie Firewall.
1. NAT Policy Formation
Fir this guide, we will explain in simple and understandable steps how you can perform port forwarding on Ruijie Firewall.
1. NAT Policy Formation
First of all, log in to the Ruijie Firewall's web interface as an administrator (admin).
From the menu above, go to the Policy → NAT Policy section.
Open the screen for creating a new NAT rule by clicking on the ”Create" button
Specify a name for the rule (for example: “PORT_IONATION_HTTP”).
Select DNAT as the NAT type.
Src. Security Zone: Select the zone where your WAN line is located.
We will select Src. the Address part as any, you can edit it according to your own infrastructuree will select Src. the Address part as any, you can edit it according to your own infrastructure.
Dest. Address: From herewill select Src. the Address part as any, you can edit it according to your own infrastructure.
Dest. Address: From here we will define our external IP.
After clicSrc. the Address part as any, you can edit it according to your own infrastructure.
Dest. Address: From hell select Src. the Adart as any, you can edit it according to your own infrastructure.
Dest. Address: From here we will define our external IP.
After clicking on the Address section, we click on the Add Address button.
We name our external IP address in the Name section (for example: DisIp), then we define our external IP address in the IP Addresses/Range section and press the Confirm button
We select our added IPv4 address from the Dest. Address section and click the Confirm button.
Then we click on the Service section.
We will create a new Service, we click on the Add Service button
We name our service in the Service Name section, click the Create button under the Protocol List to create a new protocol
Destour service in the Service Name section, click the Create button under the Protocol List to create a new protocol
Dest. In the port sectioname our service in the Service Name section, click the Create button under the Protocol List to create a new protocol
Dese name our service in the Service Name section, click the Create button under the Protocol List to create a new protocol
Dest. In the port section, we enter the number of the port we want to direct to and click the Confirm button.
Then, we mark the service we created here and click the Confirm button.
In the Packet After NAT section, we enter the internal IP address of the device to be routed and press the Save button.
2. Creating a Security Policy (Security Policy)
In order for NAT to work, it is necessary to define a Security Policy.
Enter the Policy → Security Policy menu and add a new rule with “Create”
In the section that opens, click the Create button and continue.the Policy → Security Policy menu and add a new rule with “Create”
In the section that opens, click the Crenter the Policy → Security Policy menu and add a new rule with “Create”
Enter the Policy → Security Policy menu and add a new rule with “Create”
In the section that opens, click the Create buttoer the Policy → Security Policy menu and add a new rule with “Create”
In the section that opens, clEnter the Policy → Security Policy menu and add a new rule with “Create”
In the section that opens, click the Create button and continue.
We give a name to the rule in the Name field.
We select the Policy Group field as Defatult Policy Group.
Then Src. and Dest. in the part of Src. Click on the Security Zone/Interface section.
In the window that opens, we select the WAN line and click on the Confirm button
Dest. We are entering the Address section.
Go to the Add Address→Add IPv4 Address section
In the Name section, we name our IP address and then
We are entering the IP address from the IP Address/Range section
We click on the Confirm button and save.
We select the IP address we createdlick on the Confirm button and save.
We click on the Confirm button and save.
We select the IP address we created and click on the Confirm button.
Now we are entering the Service section.
Here we select the service ck on the Confirm button and save.
We select the IP address we created and click on the Confirm button.
We click on the Confirm button and save.
We select the IP address we created and click on the Confirm button.
Now we are entering the Service section.
Here we select the service we created in the NAT Policy→ Packet Before NAT→ Service section and click the Confirm button.
This is how much our transactions are clicking on the Save button.
In this guide, we have covered step-by-step and understandable how to perform port forwarding on Ruijie Firewall.
Thanks to a properly configured NAT and security policy, you can provide secure access to devices on the internal network from the outside.
Note: Some fields in the manual, such as IP address, port number and zone definitions, are given as examples. You need to organize these sections according to your own network infrastructure and security policies. Note: Some fields in the manual, such as IP address, port number and zone definitions, are given as examples. You need to organize these sections according to your own network infrastructure and security policies.
If you are experiencing post-routing connection problems, we recommend that you review the NAT and Security PolicNote: Some fi
WhatsApp